Fixed-Gear Bike Riding Tips

By on September 14, 2017

A single-speed bike with a set drive train is what’s called a fixed-gear bicycle, or a fixie, in short. Its rims are set in movement only as you move its pedals. It’s not capable of coasting, which makes it very much different from your traditional free-wheel bikes.

6KU is a popular choice for several bikers (read the 6ku bike reviews), it appeals typically to those who’d like a little more challenge in their training. It shoves your legs to develop more strength and pedaling technique. While you need to pedal whenever, whatever the road or environmental condition is, you only improve in your overall driving ability. But before you hop on one of those vehicles, you should observe some safety and riding suggestions.

First of all, be sure to wear the proper clothing – that is, a pair of shorts or tight jeans. Injuries can be induced by loose pant thighs becoming caught in the chain of any fixed-gear bicycle. You should also use toe clips to secure your feet to the pedals. This will help you avoid hitting your legs on pedals that are constantly turning with the wheels, which normally happens when going all downhill.

Horizontal dropouts on a bike frame prevent your wheels from coming off your bike in the event of an accidental skid. Be sure you have them in your cycle frame. These grooves allow you to change your chain pressure in a proper manner.

Additionally, it’s best to have brakes on your fixie if you’ll certainly be using it on the street and not for velodrome racing. Have an entry brake installed on your bike so you can safely stop when you need to.

But since you aren’t by using a fixed-gear bike with no brakes and you need to stop, all you can do is to lock the rear end wheel up. This is done by back pedaling just enough so that the rear wheel will not likely be able to move. Without removing your foot from the pedals and without moving, balance the pressure putting on both front and back throtle. This will help you have a fairly easy restart when you really need to move forward again. It is advisable to learn how to do this if you don’t have any brake systems.

If you’re having a difficult experience to start out moving on again after blocking on this type of bike, you might have to reposition your throtle. This is done by lifting your rear steering wheel briefly off the surface and moving the throtle to their starting position.

If you’ve been used to free-wheel bikes, you may well be challenged a lttle bit with this one. However it does have its advantages more and more people who’d prefer to train are discovering now. Make absolutely certain that you watch safety guidelines for an enjoyable ride.


Leave a Reply

Your email address will not be published. Required fields are marked *